產(chǎn)品名稱HTL600B
產(chǎn)品介紹
| 國際標準型號 | INTERNATIONAL CLASS | NO | HTW600 | ||
| L款規(guī)格 | SPCIFICATION | CN | HTL600B | ||
| A | B | C | |||
| 注射裝置 | INJECTION UNIT | ||||
| 螺桿直徑 | Screw diameter | mm | 90 | 95 | 100 |
| 螺桿長徑比 | Screw L/D ratio | L/D | 23.2 | 22 | 20.9 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 2863 | 3190 | 3534 |
| 注射重量 | Injection weight(ps) | g | 2605 | 2903 | 3216 |
| 注射速率 | Injection rate | g/s | 575 | 640 | 710 |
| 注射壓力 | Injection pressure | Mpa | 177 | 159 | 143 |
| 螺桿轉(zhuǎn)速 | Screw speed | rpm | 150 | ||
| 鎖模裝置 | CLAMPING UNIT | ||||
| 鎖模力 | Clamping force | KN | 6000 | ||
| 移模行程 | Open stroke | mm | 870 | ||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 870×870 | ||
| 最大模厚 | Max.Mold height | mm | 900 | ||
| 最小模厚 | Min.Mold height | mm | 350 | ||
| 頂出行程 | Ejector stroke | mm | 250 | ||
| 頂出力 | Ejector stroke | KN | 150 | ||
| 其他 | OTHERS | ||||
| 最大油泵壓力 | Max.Pump pressure | Mpa | 16 | ||
| 最大馬達功率 | Pump motor power | KW | 30+37 | ||
| 電熱功率 | Heating power | KW | 42.95 | ||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 10.2×2.24×2.71 | ||
| 油箱容積 | Olitank cubage | L | 1100 | ||
| 機器重量 | Machine weight | t | 28 | ||
