產品名稱HTX250
產品介紹
| 國際標準型號 | INTERNATIONAL CLASS | NO | HTW250 | ||
| L款規格 | SPCIFICATION | CN | HTX250 | ||
| A | B | C | |||
| 注射裝置 | INJECTION UNIT | ||||
| 螺桿直徑 | Screw diameter | mm | 50 | 55 | 60 |
| 螺桿長徑比 | Screw L/D ratio | L/D | 23 | 21 | 19.2 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 455 | 550 | 655 |
| 注射重量 | Injection weight(ps) | g | 416 | 503 | 600 |
| 注射速率 | Injection rate | g/s | 187 | 227 | 270 |
| 注射壓力 | Injection pressure | Mpa | 205 | 169 | 142 |
| 螺桿轉速 | Screw speed | rpm | 180 | ||
| 鎖模裝置 | CLAMPING UNIT | ||||
| 鎖模力 | Clamping force | KN | 2500 | ||
| 移模行程 | Open stroke | mm | 540 | ||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 580×580 | ||
| 最大模厚 | Max.Mold height | mm | 550 | ||
| 最小模厚 | Min.Mold height | mm | 200 | ||
| 頂出行程 | Ejector stroke | mm | 150 | ||
| 頂出力 | Ejector stroke | KN | 70 | ||
| 其他 | OTHERS | ||||
| 最大油泵壓力 | Max.Pump pressure | Mpa | 16 | ||
| 最大馬達功率 | Pump motor power | KW | 22 | ||
| 電熱功率 | Heating power | KW | 15 | ||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 5.82×1.55×2.23 | ||
| 油箱容積 | Olitank cubage | L | 380 | ||
| 機器重量 | Machine weight | t | 8 | ||
