產品名稱HTL2000
產品介紹
International standard model | INTERNATIONAL CLASS | NO | HTW2000 | |||
L specifications | SPCIFICATION | CN | HTL2000 | |||
| A | B | C | D | |||
| 注射裝置 | INJECTION UNIT | |||||
| 螺桿直徑 | Screw diameter | mm | 130 | 140 | 150 | 160 |
| 螺桿長徑比 | Screw L/D ratio | L/D | 25.9 | 24 | 22.4 | 20.9 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 9460 | 11238 | 12900 | 14678 |
| 注射重量 | Injection weight(ps) | g | 8608 | 10226 | 11739 | 13356 |
| 注射速率 | Injection rate | g/s | 1172 | 1360 | 1560 | 1776 |
| 注射壓力 | Injection pressure | Mpa | 190 | 163 | 142 | 125 |
| 螺桿轉速 | Screw speed | rpm | 70 | |||
| 鎖模裝置 | CLAMPING UNIT | |||||
| 鎖模力 | Clamping force | KN | 20000 | |||
| 移模行程 | Open stroke | mm | 1600 | |||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 1650×1500 | |||
| 最大模厚 | Max.Mold height | mm | 1620 | |||
| 最小模厚 | Min.Mold height | mm | 800 | |||
| 頂出行程 | Ejector stroke | mm | 420 | |||
| 頂出力 | Ejector stroke | KN | 490 | |||
| 其他 | OTHERS | |||||
| 最大油泵壓力 | Max.Pump pressure | Mpa | 16.5 | |||
| 最大馬達功率 | Pump motor power | KW | 45+55+55 | |||
| 電熱功率 | Heating power | KW | 110.7 | |||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 17.80×3.35×4.28 | |||
| 油箱容積 | Olitank cubage | L | 3700 | |||
| 機器重量 | Machine weight | t | 137 | |||
